|
|
Customized to your specifications! |
 |
 |
 |
 |
 |
 |
 |
|
All of our Crosses are made of white vinyl which makes them extremely durable, easy to clean and low maintenance. They come in two sizes, 18" & 36", and have standard graphics reading "in memory of", with a picture frame, and mounting bracket. The Roadside model also come with the name of your choice in standard reflective colors (red - reserved for DUI related accidents, green, & blue) at no extra charge. The picture frames are made of a durable acrylic and fit standard wallet size photographs. We do recommend that you laminate your picture before framing it to prevent aging. The vinyl Cross and acrylic frame will not rot unlike wood and other materials typically used for roadside memorials. They will also never need painting and can be easily cleaned with soap and water. Built strong for easy installation, you new Cross is boxed and sent to you with no tools needed. As you can see below, there are only 2 main pieces which snap together. The mounting stand comes packed in the vertical section. Simple remove the wing nut and slid it out. You *MUST* drive this in the ground first, leaving the upper 4-5 inches (flat area) exposed. Then slide the assembled Cross over the mounting stand until the holes line up, and reinstall the screw and wing nut, and you're done! Click on the photo below for a pop-up enlargement! Packaged thin for less shipping cost
Shown are top and side views straight from the box Vertical and horizontal pieces
The two main (visible) sections. Assembling the main sections
The shorter (horizontal) bar slides into the middle of the longer (vertical) bar, careful to keep the slots to the bottom so that they will line up and lock on the longer bar. This way, there's no sliding around, and you don't have to 'find' the middle. Main section
That's all there is to it! Mounting
As mentioned above, just slide out the mounting section from the bottom of the longer (vertical) section, spin it around so that the flat part is on top, and, after sinking it into the ground up to a little below the flat section, slid it back in the longer bar. Reinstall the screw and wing nut, and your all set. * REMEMBER - You must drive the metal mounting section in the ground FIRST, then install the cross. Failure to do this could, and very
likely will break the cross leaving it unusable!
To lose a loved one is one of the hardest situations to deal with.
Memorial Crosses have increasingly become a way not only to honor and
remember those who have passed on, but to share those memories with others. Through my experience in emergency response with our local Rescue Squad, I've seen the
devastation that comes from the loss of a loved one, and I've come to know how much it means to the family to be able to express that sorrow. This, and the fact that there are few options available
on the market, led me to believe we could provide a Cross, made from only the best materials, designed for ease of use and maintenance, and keep it at a low cost.
Fully customizable, you may select names, dates, graphic colors (red is reserved, with reflective graphics, on our Roadside model for DUI related accidents), symbols, and
you may even choose to add a picture. In roadside or related cases, we always recommend you get the
permission of the property owner before installing your cross.
We would be honored if you could take a bit of time to browse our site and get to know us
and our company a little better. If you are interested in buying one of our Crosses (and bulk orders are available), feel free to call us for a quote or use our online order form (see the button to
your upper left). |
